Ancor
Ancor Heavy Duty Ring Lug, 8 AWG, 3/8 in. Stud, 2-Pack
$3.89
Ground shipping is $9.95 per order, added at checkout. Ships to the lower 48 states.
Tinned copper ring lugs for 8 AWG wire on a 3/8 in. battery stud. Two per pack.
- $9.95 ground shipping, lower 48
- 30-day returns
- Secure checkout
- Specs from the maker
- Questions? 831-477-9600
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Guides that help
Description
- Sized for 8 AWG cable on a 3/8 in. stud, two per pack
- Tinned annealed copper resists salt and damp
- Closed-end barrel with no seam, for a solid crimp
These are the battery-end lugs for 8 AWG trolling motor leads and 8/2 duplex cable. Check your battery’s terminal before you order: 5/16 in. and 3/8 in. studs are both common, and a lug on the wrong stud won’t sit flat or tighten properly. One thing to know: the Bluewater trolling motor breakers take 1/4 in. lugs, so the breaker end of the run needs a different size. Crimp with a proper lug crimper, then seal with adhesive heat shrink; our crimping guide walks through it. Wire sizes for common motors are in our trolling motor battery guide.
Good fit if: You’re putting 8 AWG leads or 8/2 duplex on a battery with a 3/8 in. stud.
Not the pick if: Your stud is 5/16 in. (get the 252235), your cable is 6 AWG, or this is the breaker end (Bluewater breakers take 1/4 in.).
Specs from the maker
| Material | Annealed copper, 100% tin plated |
|---|---|
| Barrel | No seam, closed end |
| Standard | UL 486A |
Maker’s page: Ancor catalog, p. 30
Additional information
| Weight | 0.03 lbs |
|---|---|
| Dimensions | 4.00 × 1.63 × 0.50 in |
| Brand | Ancor |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.