Victron smart system bundle (Cerbo GX + SmartShunt + MPPT)
$508.30 complete kit
Ground shipping is $9.95 per order, added at checkout. Ships to the lower 48 states.
3 parts, picked to work together. Bring your own battery.
Add the whole kit to cartAlready own a part? Set it to 0 in the list below and add the rest.
See your whole 12V system in one place: Victron Cerbo GX MK2 system hub, SmartShunt battery monitor and SmartSolar MPPT 100/30 solar controller.
- $9.95 ground shipping, lower 48
- 30-day returns
- Secure checkout
- Specs from the maker
- Questions? 831-477-9600
Guides that help
Description
See your whole 12V system in one place: Victron Cerbo GX MK2 system hub, SmartShunt battery monitor and SmartSolar MPPT 100/30 solar controller.
Bring your own battery: this kit is everything around it.
Add all parts to cart. Already own a part? Set it to 0 below.
What’s in the box
| Qty | Part | What it does |
|---|---|---|
| 1 | Victron Cerbo GX MK2 system monitor | Victron Cerbo GX MK2 system hub. Collects data from the SmartShunt, MPPT and other Victron gear. Screen sold separately (GX Touch 50 or 70). |
| 1 | Victron SmartShunt 500A/50mV Bluetooth | Battery monitor. Counts every amp in and out and shows state of charge on your phone over Bluetooth. No screen to mount. |
| 1 | Victron SmartSolar MPPT 100/30 | Solar charge controller (MPPT), up to 100V from the panels and 30A to the battery, with Bluetooth. |
Swaps on this page: Victron SmartSolar MPPT 100/50; Victron SmartShunt 1000A/50mV Bluetooth battery monitor. Set the part you don’t need to 0 and the swap to 1.
Not in the box
- The battery and solar panels
- A fuse holder for the MPPT battery cable
- Two VE.Direct cables (Cerbo to SmartShunt, Cerbo to MPPT), sold separately, 10 m max
- A screen. The Cerbo has none; a Victron touch display is a separate part
- Fuses and cable for the solar controller and the shunt
Who it’s for
Boat, van and RV owners with solar who want battery, solar and charging data together, from the Victron products that talk to each other.
Good fit if: You have solar on your boat, van or RV and want battery, solar and charging data together on one Victron hub.
Not the pick if: Phone readings are enough: the SmartShunt 500A and SmartSolar MPPT 100/30 work on their own over Bluetooth, no Cerbo needed.
How it goes together
You can do this. Here’s how.
- Turn everything off and disconnect the battery, negative first.
- Install the SmartShunt: battery negative on BATTERY MINUS, everything else on the system side, fused red wire to battery positive.
- Install the MPPT: battery side through its 35 to 40A fuse, connect the battery before the panels.
- Mount the Cerbo GX, power it with its fused cable, and plug a VE.Direct cable from it to the SmartShunt and another to the MPPT.
- Reconnect the battery (positive first, negative last) and set each one to your battery in the VictronConnect app.
Read next: Cerbo GX on a boat: do you need one? · What size MPPT charge controller?
Fit rules
- The Cerbo GX runs on 8 to 70V DC and comes with a power cable with an inline fuse, 2 VE.Can terminators and terminal blocks. VE.Direct cables are not in its box. (Victron Cerbo GX manual)
- The SmartShunt and the MPPT each connect to the Cerbo with a VE.Direct cable, up to 10 m. (Victron Cerbo GX manual)
- MPPT 100/30: up to 100V open-circuit from the panels, 30A to the battery, fuse its battery cable at 35 to 40A. (Victron SmartSolar MPPT manual)
- Only the battery negative goes on the battery side of the SmartShunt. (Victron SmartShunt manual)
Maker’s pages: Victron Cerbo GX · Victron SmartShunt · Victron SmartSolar MPPT
Questions
Do I need the Cerbo if the SmartShunt and MPPT already have Bluetooth?
No, they work on their own. The Cerbo puts everything in one place and can log it.
Can I add more Victron gear later?
Yes. The MK2 has 3 VE.Direct ports, plus VE.Can.
Each part ships from the maker’s distributor, so a kit can arrive in more than one box.
