Victron Energy
Victron Lithium SuperPack NG 25.6V 100Ah Battery
$1,785.00
Ships by truck: $300 freight per order, lower 48, liftgate delivery.
Final sale: no returns except for damage in transit.
- 25.6 V, 100 Ah LiFePO4 (2,560 Wh, our math)
- BMS, Bluetooth and self-heater built in
- Parallel only, IP65
- 24 V RVs, trucks and SUVs swapping out lead-acid house batteries
- Cold-weather camping: the self-heater lets it charge below freezing
- Owners who want one battery with no separate BMS to wire
- Series wiring: Victron allows parallel only
- Chargers stuck on a lead-acid, equalize or desulfation setting
- Systems that need more than 200 A continuous from one battery
- $300 truck freight, lower 48
- Final sale (damage covered)
- Secure checkout
- Specs from the maker
- Questions? 831-477-9600
Description
A 24 V battery with the BMS inside, 20.5 kg, for 24 V trucks, work vehicles and RV systems. Example, our math: 2,048 Wh usable at 80% runs a 60 W average load for about 34 hours.
No extra parts needed. The built-in BMS and battery monitor show state of charge, temperature and alarms in the VictronConnect app over Bluetooth. A self-heater (up to 130 W) warms the cells so it can charge below freezing.
Wire these in parallel only. Victron does not allow series, so use the 24 V pack for a 24 V system. Set your charger to a lithium profile: no lead-acid, equalize or desulfation modes.
Good fit if: Your 24 V truck, work vehicle or RV needs one battery with the BMS and heater inside.
Not the pick if: Your system is 48 V: these can’t go in series, so look at the Lithium NG 51.2V 100Ah, which needs a separate Victron NG BMS.
Specs from the maker
| Voltage | 25.6 V |
|---|---|
| Capacity | 100 Ah at 25 °C (2,560 Wh, our math) |
| Chemistry | LiFePO4 |
| Charge voltage | 28 V recommended (27 to 28.4 V range), float 27 V |
| Charge current | 30 A recommended, 100 A max continuous |
| Discharge current | 50 A recommended, 200 A max continuous |
| Temperature | Charge and discharge -30 to +60 °C (-22 to 140 °F); below 0 °C it heats first, then charges |
| Cycle life | 2,500 cycles at 80% depth of discharge (to 80% of capacity, 25 °C) |
| Ingress rating | IP65 |
| Wiring | Parallel only, no series |
| Mounting | Upright or on its long side, on a flat support |
| Terminals | M8, screws included |
| Size (L x W x H) | 466 x 198 x 173 mm (18.3 x 7.8 x 6.8 in), plus 15 mm for terminal screws |
| Weight | 20.5 kg (about 45 lb) |
| Warranty | 3 years from purchase on Victron lithium batteries (Victron warranty policy; proof of correct use is needed for a claim) |
Maker’s page: victronenergy.com
Specs source: the maker's datasheet.
Additional information
| Weight | 50 lbs |
|---|
