Victron Energy
Victron Lithium SuperPack NG 12.8V 100Ah Battery
$935.00
Ships by truck: $300 freight per order, lower 48, liftgate delivery.
Final sale: no returns except for damage in transit.
- 12.8 V, 100 Ah LiFePO4 (1,280 Wh, our math)
- BMS, Bluetooth and self-heater built in
- Parallel only, IP65
- 12 V RVs, trucks and SUVs swapping out lead-acid house batteries
- Cold-weather camping: the self-heater lets it charge below freezing
- A 12 V Group 49 battery box
- Series wiring: Victron allows parallel only (use the 24 V SuperPack for 24 V)
- Chargers stuck on a lead-acid, equalize or desulfation setting
- Systems that need more than 200 A continuous from one battery
- $300 truck freight, lower 48
- Final sale (damage covered)
- Secure checkout
- Specs from the maker
- Questions? 831-477-9600
Description
The BMS is inside, so there is no separate BMS to buy, and the case matches BCI Group 49, so it can drop into many standard battery boxes. Victron made it to replace lead-acid in RVs, trucks and SUVs. 10.7 kg. Example, our math: 80 Ah usable at 80% runs a 3 A average load for about 26 hours.
No extra parts needed. The built-in BMS and battery monitor show state of charge, temperature and alarms in the VictronConnect app over Bluetooth. A self-heater (up to 65 W) warms the cells so it can charge below freezing.
Wire these in parallel only. Victron does not allow series, so use the 24 V pack for a 24 V system. Set your charger to a lithium profile: no lead-acid, equalize or desulfation modes.
Good fit if: You’re replacing a lead-acid battery in an RV, truck or SUV and want the BMS, Bluetooth and heater built in, in a Group 49 size case.
Not the pick if: You need 24 V: these wire in parallel only, so get the SuperPack NG 25.6V 100Ah.
Specs from the maker
| Voltage | 12.8 V |
|---|---|
| Capacity | 100 Ah at 25 °C (1,280 Wh, our math) |
| Chemistry | LiFePO4 |
| Charge voltage | 14 V recommended (13.5 to 14.2 V range), float 13.5 V |
| Charge current | 30 A recommended, 100 A max continuous |
| Discharge current | 50 A recommended, 200 A max continuous |
| Temperature | Charge and discharge -30 to +60 °C (-22 to 140 °F); below 0 °C it heats first, then charges |
| Cycle life | 2,500 cycles at 80% depth of discharge (to 80% of capacity, 25 °C) |
| Ingress rating | IP65 |
| Wiring | Parallel only, no series |
| Mounting | Upright or on its long side, on a flat support |
| Terminals | M8, screws included |
| Size (L x W x H) | 273 x 173 x 173 mm (10.7 x 6.8 x 6.8 in), plus 15 mm for terminal screws |
| Weight | 10.7 kg (about 24 lb) |
| Warranty | 3 years from purchase on Victron lithium batteries (Victron warranty policy; proof of correct use is needed for a claim) |
Maker’s page: victronenergy.com
Specs source: the maker's datasheet.
Additional information
| Weight | 28.2 lbs |
|---|
